Home | Site Map | Company | Literature | Tech Info | What's New | Discontinued | Nexus Monitoring System | FAQs | Warehouses | Contact Us | Links
Print this page   
   Product Categories
•  Exit Signs
•  Battery Units
•  Remote & Heads
•  Emergency Ballasts
•  Inverter Series
•  Lamp Information
•  Accessories & General Information
•  Warranty
   Sectors of Use
•  Architectural
•  Industrial
•  Commercial
Search Products by Keywords
(Not for part number lookup.)


Acrobat© Reader© is required to view all PDF downloads.



Product Categories  /  Inverter Series  /  Mini Inverter Series
Catalog Sheet
Revit Files
Instruction Sheet 720W
Instruction Sheet 125/250/400W
 [NEW]   Mini Inverter Series

Interruptible Unit Equipment 125W, 250W, 400W or 720W Standard with Non-Audible Improved Self-Diagnostics Circuitry

Specifications:
  • 14-Gauge Steel
  • White semi-gloss powered-coat paint finish
  • Surface mount
  • Optional recessed T-Bar (125W unit only)
  • LED
  • Incandescent
  • Fluorescent
  • Operating switched, normally-on or normally-off fixture types
  • Incandescent, LED, fluorescent lamps and ballast combinations, including triac dimmable ballasts (consult factory if 0-10V or DALI dimming)
  • 125W, 250W, 400W or 720W
  • Line voltage allows for remote mounting of the emergency fixtures at distances up to 1000 feet
  • May accept load to it’s full capacity when load feature power factor of 0.9 for 250W model and 0.8 for 125, 400 and 720W model
  • High-efficiency pure sine wave inverter at 250W capacity or higher
  • Temperature compensated charger
  • Replaceable output fuse protection
  • Low battery voltage disconnect
  • Unit comes standard with electronic lockout and brownout circuits
  • Standard with a non-audible self diagnostic/charger is fully self-contained, fully automatic microcontroller- based system
  • Optional audible auto diagnostic available
  • Units equipped with NEXUS® self-testing monitoring system circuitry shall selftest, in accordance with NFPA101, Life Safety Code minimum 30 seconds every 30 days, 30 minutes every six months and 90 minutes annually as well as keep a history of all testing logs, plus feature a real-time diagnoses, as well as, be able to locate exact fixture location while notifying service personnel to the status of the fixture via email notification. NEXUS® system interface with an improved minimum load lost detection of 10%
  • 12V oversized Valve Regulated Lead-Calcium (VRLA) battery
  • Provides 90 minutes of emergency operation
  • Choice of Voltage 120V in/120V out or 277V in/277V out operation, 60Hz
Sectors of Use:


    View list of Nexus compatible units

    T&B AccessQuick ShipThomas & Betts
    © Thomas & Betts Corporation 2017. No material from this site may be copied, distributed or used in any way without the express prior permission of Thomas & Betts.