Home | Site Map | Company | Literature | Tech Info | What's New | Discontinued | Nexus Monitoring System | FAQs | Warehouses | Contact Us | Links
Print this page   
   Product Categories
•  Exit Signs
•  Battery Units
•  Remote & Heads
•  Emergency Ballasts
•  Inverter Series
•  Lamp Information
•  Accessories & General Information
•  Warranty
   Sectors of Use
•  Architectural
•  Industrial
•  Commercial
Search Products by Keywords
(Not for part number lookup.)


Acrobat© Reader© is required to view all PDF downloads.



Product Categories  /  Exit Signs  /  X402 Series
Catalog Sheet
Instruction Sheet
 X402 Series

The X402 Series is an explosion-Proof, remote exit Sign fixture for operation in Hazardous and/or Wet locations.

These Emergency Exit signs are designed for mounting in locations that are remote from their power source.

Specifications:
  • EXP Housing: Hazardous Location, heavy gauge copper-free case aluminum
  • Spin-off gasketed cover prevents propagation of internally generated arcs
  • Stainless steel vent/drain
  • Circuit board: silicone conformal coated
  • Sealed test switch
  • X402 Exit and Lamp Head fixture: heavy cast aluminum with pyrex lens
  • Exit Faceplate: heavy-duty 20 gauge steel, baked enamel grey finish
  • 6 inch EXIT lettering legend, available in Red or Green
  • X402 AC-Only, AC/DC Exit Head, Surface Mount, ceiling, wall or pendant
  • EXP Self-Powered Exit Sign Surface Wall Mount Only
  • EXP Combination Unit Surface Wall Mount Only
  • Self-Powered and Combination Housing includes (4) mounting lugs on each corner and 3/4 inch NPT conduit knock-outs entry on top and bottom of housing
  • X402 & EXP single face model includes (1) faceplate
  • X402 Double face model includes (2) faceplates
  • Finished in industrial gray
  • Faceplate includes two field-selectable, knock-out chevron indicators
  • Manufactured in accordance with UL844, UL1203, and UL924
  • Rated for operation in Class I, Division 1 & 2, Groups C and D
  • Rated for operation in Class II, Division 1 & 2, Groups E, F and G
  • Complies with NEC, OSHA and NEMA for above Classes and Groups
  • Three-Year full warranty (subject to proper installation and maintenance)
  • AC-Only Exit: Order X402 Exit Sign to be powered by a separate AC power source during emergency operation
  • AC/DC Exit: Order X402 Exit Sign and a Transfer Switch Panel thus allowing for emergency operation to be supplied by a separate remote DC source
  • Self-Powered Exit: Order EXP6N or EXP12N with attached X402 Exit Sign
  • Combination Units: Order EXP6N or EXP12N, a E402 Light Head, and X402 Exit Sign
  • (needed to be ordered separately with AC/DC Exit Signs)
  • A TS panel is required for AC/DC Hazardous Location X402 Exit Signs that are under constant operation as required by code. TS panels are not designed to be installed/mounted in a hazardous or explosive area. TS panels are to be mounted remotely from these areas types.
  • TS panel available for up to 6V= 50W, 12V= 100W, 24V= 100W
  • To Order a TS Panel the following information is required:
  • 1) AC Input. 120V and other voltages are available
  • 2) DC voltage.
  • 3) The total wattage load of all X402 lamp(s) to be supplied by TS Panel
  • Electrical Specifications for the TS Panel
  • Input AC voltage; 120V, 60Hz, 1 phase (other voltages available)
  • Input DC voltage; 6, 12 or 24V (must select which applies)
  • Input DC voltage must be identical to DC output voltage
  • Wattage: TS Panel oversized 10-20% greater than total connected load
Sectors of Use:
T&B AccessQuick ShipThomas & Betts
© Thomas & Betts Corporation 2017. No material from this site may be copied, distributed or used in any way without the express prior permission of Thomas & Betts.